#Pace sidetalk 1000b mods how to#

Check the pins in the radio for damage as well. Check for breaks or damage to the plug and cord. Make sure your CB mic is plugged in securely. Fully Press CB Microphone PTT Buttonīe sure you are pressing the CB microphone button all the way in.

They should be screwed in tight with all caps and weather protectors in place.

Make sure the CB antenna and coax are connected properly. If your radio has a PA feature, make sure the switch for this is in the CB position. You have confirmed that someone on your frequency is listening, but does not pick you up. Your CB comes on, but you are not getting responses when you try to transmit. Make sure your vehicle's electrical system is operating properly.

#Pace sidetalk 1000b mods how to#

Check SWR/CB Antenna ConnectionsĬheck for a high standing wave (see How to Tune a CB Antenna). Make sure the CB radio's ground wire is connected to a good chassis ground in the vehicle. If your radio has a power plug, make sure it is seated well. Make sure the power cord connections are attached correctly. Fuses may blow when the radio is switched on, or when the CB microphone is keyed up. The CB radio repeatedly blows fuses, despite the correct fuse type being used. Make sure the lights are not switched off. Some CB radios have the ability to dim or turn off the face lights, or even just the channel indicator. If your CB radio is not connected directly to the battery, make sure the fuse panel or extension wire it is connected to has a good connection to the battery. Make sure the CB radio's fuse is not blown and that it is seated correctly. There may be sound and you may be able to transmit and receive. Many radios come with a weather operation mode.

Many radios come with an instant channel 9/19 switch. The channel may show 9, 19 or W and a number. When you turn the channel selector knob, the channel does not change. You should hear a 'click' as you turn it clockwise, indicating the radio's power is on. The on/off switch for most radios is paired with the volume knob.Īlso check the in-line fuse for the CB radio's power cord- if it is burned out, your radio will not power on.Īs always, if you can't find what you need here, you can contact us for more help. This guide assumes you are using a stock, unmodified radio with a standard CB antenna.

A link to more information is provided when available. Basic Troubleshooting and Possible SolutionsĮach section below lists a problem and the potential solutions for it. #Pace sidetalk 1000b how to#Ĭheck out our awesome Help Center article How To Tune a CB Antenna to learn more. No matter how well you plan out a CB installation, or if you use the highest quality parts, sometimes you will run into problems with your CB system.Closed: New threads not accepted on this page This guide to troubleshooting CB radios and issues will help you find and correct some of the most common problems that plague CB operators. PLEASE PLACE ALL OF YOUR CHANNEL GUARD INSTALLATON QUESTIONS HERE. In some radios if you don't the blanker will not work. Also try to ADD the filter to the exsisting one now you have 2 filters not one. There are a few stations in this area that are to darn loud and bleed all over me.